|
Mobile
|
|
|
Mobile module
|
5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL
|
|
Status
|
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID.
|
|
SMS/Call
|
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities
|
|
USSD
|
Supports sending and reading Unstructured Supplementary Service Data messages
|
|
Black/White list
|
Operator black/white list
|
|
Band management
|
Band lock, Used band status display
|
|
APN
|
Auto APN
|
|
Bridge
|
Direct connection (bridge) between mobile ISP and device on LAN
|
|
Passthrough
|
Gateway assigns its mobile WAN IP address to another device on LAN
|
|
Multiple PDN
|
Possibility to use different PDNs for multiple network access and services
|
|
|
|
|
Wireless
|
|
|
Wireless mode
|
802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates of up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
|
|
WiFi security
|
WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
|
|
ESSID
|
ESSID stealth mode
|
|
WiFi users
|
Up to 150 simultaneous connections
|
|
Wireless Hotspot
|
Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
|
|
Wireless mesh/ roaming
|
Wireless mesh (802.11s), fast roaming (802.11r)
|
|
|
|
|
Ethernet
|
|
|
WAN
|
1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, WAN supports auto MDI/MDIX crossover
|
|
LAN
|
4 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover
|
|
|
|
|
Network
|
|
|
Network protocols
|
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL)
|
|
Routing
|
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
|
|
Connection monitoring
|
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
|
|
Firewall
|
Port forwards, traffic rules, custom rules
|
|
DHCP
|
Static and dynamic IP allocation
|
|
DDNS
|
Supported >25 service providers, others can be configured manually
|
|
SSHFS
|
Possibility to mount remote file system via SSH protocol
|
|
|
|
|
Security
|
|
|
Authentication
|
Pre-shared key, digital certificates, X.509 certificates
|
|
Firewall
|
Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
|
|
Attack prevention
|
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
|
|
VLAN
|
Port and tag-based VLAN separation
|
|
Mobile quota control
|
Set up custom data limits for SIM card
|
|
WEB filter
|
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
|
|
Access control
|
Flexible access control of TCP, UDP, ICMP packets, MAC address filter
|
|
|
|
|
VPN
|
|
|
OpenVPN
|
Multiple clients and a server can run simultaneously, 12 encryption methods
|
|
OpenVPN Encryption
|
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
|
|
IPsec
|
IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
|
|
GRE
|
GRE tunnel
|
|
PPTP, L2TP
|
Client/Server services can run simultaneously, L2TPv3 support
|
|
SSTP
|
SSTP client instance support
|
|
STUNNEL
|
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
|
|
DMVPN
|
Method of building scalable IPsec VPNs
|
|
WireGuard
|
WireGuard VPN client and server support
|
|
ZeroTier
|
ZeroTier VPN
|
|
|
|
|
System Characteristics
|
|
|
CPU
|
Quad-core ARM Cortex A7, 717 MHz
|
|
RAM
|
256 MB (100 MB available for userspace)
|
|
FLASH storage
|
256 MB (80 MB available for userspace)
|
|
|
|
|
Location tracking
|
|
|
GNSS
|
GPS, GLONASS, BeiDou, Galileo
|
|
Coordinates
|
GNSS coordinates via WebUI, SMS, TAVL, RMS
|
|
NMEA
|
NMEA 0183
|
|
Server software
|
Supports server software: TAVL, RMS
|
|
Geofencing
|
Multiple configurable geofence zones
|
|
|
|
|
USB
|
|
|
Data rate
|
USB2.0
|
|
Applications
|
Samba share, USB-to-serial, Modbus gateway
|
|
External devices
|
Possibility to connect external HDD, flash drive, additional modem, printer
|
|
Storage formats
|
FAT, FAT32, NTFS
|
|
|
|
|
Input/ Output
|
|
|
Input
|
1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
|
|
Output
|
1 x Digital Output, Open collector output, max output 30 V, 300 mA
|
|
Events
|
SMS, Email, RMS
|
|
I/O juggler
|
Allows setting certain I/O conditions to initiate event
|
|
|
|
|
Power
|
|
|
Connector
|
5 x RJ45 ports, 10/100/1000 Mbps
|
|
I/Os
|
1 x Digital Input, 1 x Digital Output on 4-pin power connector
|
|
Status LEDs
|
3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs
|
|
SIM
|
2 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
|
|
Power
|
1 x 4-pin DC power connector
|
|
Antennas
|
4 x SMA for Mobile, 2 x RP-SMA for WiFi, 1 x SMA for GNSS
|
|
USB
|
1 x USB A port for external devices
|
|
Reset
|
Reboot/User default reset/Factory reset button
|
|
Grounding
|
1 x Grounding screw
|
|
|
|
|
Physical Specification
|
|
|
Casing material
|
Aluminum housing
|
|
Dimensions (W x H x D)
|
132 x 44.2 x 95.1 mm
|
|
Weight
|
533 g
|
|
Mounting options
|
DIN rail (can be mounted on two sides), flat surface placement
|
|
|
|
|
Operating environment
|
|
|
Operating temperature
|
-40 °C to 75 °C
|
|
Operating humidity
|
10 % to 90 % non-condensing
|
|
Ingress Protection Rating
|
IP30
|
